Ultrasonic liquid level sensor in agricultural drainage application solutions

Jingxun January 14, 2022

0 774 3 minutes read

China has the largest population in the world. And its water resources per capita are only 1/4 of the world’s average. Among which agricultural water occupies a large part. Agriculture is also an important pillar of China’s economic development. And agricultural water consumption accounts for about 65% of the total water resources. However gricultural water waste is very serious, mainly reflected in.

Low utilization coefficient of irrigation water. Othervise, also only about 45% on average. The utilization rate of natural precipitation is low, only reaching 56%. The efficiency of agricultural water is not high, among which the utilization efficiency of farmland irrigation water is only about 1.0kg/m3. The area of water-saving irrigation projects initially renovated only accounts for 30 percent of the country’s irrigation area. In addition, the country’s water shortage in normal years is nearly 40 billion m3. Of which agricultural water shortage is about 30 billion m3.

With the development of smart agriculture. Farmland irrigation engineering plays an irreplaceable role in guaranteeing crop yield and promoting agricultural development. And for China, as a big agricultural country. However,the implementation of farmland irrigation canal. And water conservancy project is undoubtedly of very important practical significance.

What is a canal?

Farmland irrigation often uses river water, through the ground opened “ditch”. Into the farmland. Aqueduct is the waterway of artificial cut, have trunk canal, branch canal cent. Trunk canal and branch canal are generally built with stone or cement. The following industrial network and everyone to understand the application of ultrasonic level sensor in agricultural canals solutions.

Smart agriculture through sensors!

High demand for food crops, environmental impacts and increased profitability of farms have led to the use of sensors to improve accuracy. And reliability in all aspects of agriculture. Too, in the channel management in the channel management and channel water level monitoring alarm is one of important management content. The water level reached a certain degree of need timely warning signal, alarm monitoring using traditional manual. This way of dependence in people. In the next step in the observed water level change and take appropriate action, slow. In the channel management. But automatic water level alarm device with simple structure and easy realization is needed. MaxBotix ultrasonic level sensor – MB7380 is recommended to detect channel water level.

Introduction of our product

The ultrasonic sensor is also a kind of ultrasonic characteristics developed from the sensor. And the advantages of accurate measurement, wide detection range, flexible use. Simple maintenance and so on. The HRXL-MaxSonar-WR sensor line provides high precision and high resolution ultrasonic proximity in air detection and ranging. The sensor line features 1 mm resolution, target size. And operating voltage compensation.

For improved accuracy, better rejection of external noise sources. Temperature compensation for internal velocity and optional external temperature compensation. Hrxl-maxsonar – WR/WRC models are available in 5 or 10 m models. This ultrasonic sensor can also detect objects ranging from 1 mm to 30 cm. With a range of objects over 30 cm usually reported as 30 cm. Interface output format is pulse in RS232(MB7360 series) or TTL(MB7380 series), width. Analog voltage and digital serial. Factory calibration is standard. For applications that require use. The HRXL-MaxSonar – WR sensor is a cost-effective solution. Accuracy range – Find, low voltage operation, space saving, low cost. And IP67 weather forecast resistance.

wate rlevel

Introduction of our company

Weihai JXCT was to establish based on idea of “Born for IoT”. It is also aiming at creating the most comprehensive industrial IoT solutions for customers from home and aborad.

Weihai Jingxun Changtong Electronic Technology Co., Ltd was to establish in November 2015. Located in Weihai, Shandong, China. And It is a national high-tech enterprise. With more than 400 stuff, 3000 square meter factory and independent technology R&D center in Jinan city. As a fast-growing industrial IoT enterprise. It integrates R & D, production. And marketing together.

Its also main products include sensor and transmission equipment required. For agricultural environmental monitoring, industrial environmental Monitoring. Atmospheric environmental monitoring. Smart city and industrial process monitoring. It also provide SaaS cloud platform-JX Cloud as the core integrated industrial IoT solution.

Weihai Jingxun Changtong Electronic Technology Co., Ltd. was to establish in 2015. Located in the most liveable city of Weihai. The company mainly provides sensing equipment and solutions in three areas of atmospheric environment monitoring. Agricultural parameter monitoring and industrial gas detection. It is a full-line IoT product supplier integrating R&D, production and sales.

The company has a variety of sensors such as Portable gas detectors. Fixed gas analyzers, and Agricultural sensors.
And We can customize the products that best meet your requirements according to your needs.

Please check :https://preposting.com/ for more information .